结构工程
断裂力学
可靠性(半导体)
开裂
压力(语言学)
变形(气象学)
应力集中
量子隧道
有限元法
振幅
材料科学
工程类
复合材料
功率(物理)
物理
光电子学
量子力学
语言学
哲学
作者
Jie Li,Bin Zhang,Dong LYU,Jingbo Guo,Kang Su,Bo Hu
标识
DOI:10.1016/j.engfailanal.2022.106669
摘要
The cutterhead of the tunnel boring machine (TBM) is a large-scale metal welded structure, which is prone to some problems such as wear and cracking during the tunnelling process. Considering this phenomenon, a damage tolerance based fatigue crack propagation rate model for the cutterhead with different reliability is established in this paper. Based on the fatigue load spectrum, the fatigue propagation life of the cutterhead with different reliability is calculated, the main factors affecting the reliability of the cutterhead are analyzed, and the engineering experiment is carried out. The results of finite element analysis show that three dangerous failure positions of the cutterhead are the junction of the split plane, the maximum deformation of the block and the center cutter seat. The load stress amplitude and initial crack size are the main factors affecting the crack propagation life and the reliability of the cutterhead. As the load stress amplitude and the initial crack size of the cutterhead increase, the fatigue crack propagation life and the reliability of the cutterhead decrease. Moreover, when the initial crack size of the cutterhead is greater than 0.5 mm, the fatigue crack propagation life of the cutterhead decreases dramatically. The research results provide a scientific basis for the crack detection, the life prediction and the reliability evaluation of the cutterhead.
科研通智能强力驱动
Strongly Powered by AbleSci AI