竹子
肿胀 的
材料科学
吸水率
复合材料
傅里叶变换红外光谱
杨氏模量
平衡含水量
抗压强度
含水量
抗弯强度
抗剪强度(土壤)
剪切(地质)
水分
模数
剪切模量
物理性质
生物降解
动态模量
红外光谱学
弹性模量
作者
Xiaoman Wang,Wenli Li,Xianli Jiang,Jianxiong Lyu,Xingong Li,Jianzheng Qiao,Kang Xu,Xianjun Li,Yiqiang Wu
标识
DOI:10.1016/j.indcrop.2025.122052
摘要
Phenolic resin-impregnated heat-treated bamboo bundles (PHB) are the basic structure units used in the production of bamboo scrimber, and their impact on the bamboo scrimber properties was closely associated with the drying process. This study investigated the influence of PHB drying temperature (50 ∼ 80 °C) and moisture content (MC: 5 ∼ 20 %) on the physical and mechanical performance of bamboo scrimber. Chemical changes in PHB under different drying conditions were analyzed using Fourier Transform Infrared Spectroscopy (FT-IR), X-ray Diffractometry (XRD), and X-ray Photoelectron Spectroscopy (XPS). Results showed that both drying temperature and PHB MC had significant effects on the physical and mechanical properties of bamboo scrimber (P < 0.05). As drying temperature increased, the degree of pre-curing in PHB gradually increased, leading to higher equilibrium MC (EMC), water absorption (WA), thickness swelling (TS), and width swelling (WS), while modulus of rupture (MOR), modulus of elasticity (MOE), horizontal shear strength (HSS), vertical shear strength (VSS), and compressive strength decreased. Additionally, as PHB MC increased, EMC of the bamboo scrimber initially decreased and then increased, whereas WA, TS, and WS consistently declined. Bending performance, shear strength, and compressive strength first improved and then deteriorated with increasing MC. To achieve bamboo scrimber with optimal overall performance, it is recommended to maintain a drying temperature below 70 °C and a PHB MC of approximately 10 %. This study elucidates the relationship between PHB drying conditions and the resulting properties of bamboo scrimber, providing a scientific basis for optimization the drying treatments of PHB. • Drying temperature and MC of PHB significantly affected bamboo scrimber properties. • Higher PHB drying temperature increased moisture uptake and reduced strength. • Optimal bamboo scrimber performance was achieved at temperature below 70 °C and a MC of about 10 %.
科研通智能强力驱动
Strongly Powered by AbleSci AI