Structural response of steel sandwich panels with PUR foam core subjected to edgewise compression: Experimental, numerical, and analytical considerations

With the objective of leading to innovative lightweight structural components in the construction sector using sandwich panels with polyurethane foam and steel face sheets, different studies were conducted on such structures, including experimental, numerical, and analytical campaigns. The experimental campaign includes the mechanical characterisation of the constituent materials and the edgewise compressive test of small-scale sandwich panels. The test protocols are detailed, and their influence on the results is assessed. Through the use of digital image correlation recordings, deformation patterns and failure mechanisms in the constituent materials and the composite structure are identified. Material constitutive models are calibrated based on the experimentally obtained results. The accuracy of such models is first evaluated against the stress–strain curves recorded during the experiments. In the second stage, the response of the sandwich panels subjected to edgewise compressive loading is simulated. A parametric analysis on the sensitivity of the numerical models to the initial geometrical imperfections is shown to be fundamental to capturing the behaviour of the sandwich panels. Furthermore, the experimental and numerical results are compared to analytical solutions of the problem of the edgewise compression of sandwich panels. Finally, a thorough discussion of the obtained experimental, numerical and analytical results is presented, along with comparisons to results available in the literature.