Sealing of Hydrogen: An Overview of Published Data
计算机科学
氢
化学
有机化学
作者
Stephen Bond
标识
DOI:10.1115/pvp2024-130053
摘要
Abstract Hydrogen is well positioned to be a key element in any upcoming energy transition. It has a role as both a fuel and as an energy storage vehicle. There is a great deal of research and industrial interest in the use and storage of hydrogen, and this seems set to continue for the foreseeable future. This is particularly the case for “green” hydrogen, where hydrogen is produced by electrolysis of water where the electrical energy is from a renewable source (e.g. wind or solar). There has been concern raised, due to its inherent properties, about the potential for leakage of hydrogen, which brings into focus bolted flange connections among other joints. The most common leakage tests for bolted flange connections use media such as helium (EN13555), methane (ASME B16.20) or nitrogen (DIN 3535), but not hydrogen. There are good reasons for choosing these gases, particularly helium, which is safe and a small molecule. However, it has been shown from earlier papers that molecule size is not the only factor in leakage, and the conversion of leakage rate from one gas to another is not universally understood. Therefore, the testing of different gasket materials and designs with hydrogen gas as the test media is typically required. This paper reviews recent public domain data on sealing tests using hydrogen, especially compared to helium for multiple types of gaskets and includes some work commissioned at a third party on spiral wound gaskets with different filler materials.