Multi-Phase Equilibrium Model of Oxygen-Enriched Lead Oxidation Smelting Process Based on Chemical Equilibrium Constant Method

With the increasingly complicated sources of lead smelting materials, it is becoming more difficult to optimize process parameters during the bottom-blowing lead oxidation smelting process. Building a bottom-blowing lead smelting thermodynamic model has significant importance for the green production of the lead smelting process. In this study, we built a multi-phase equilibrium thermodynamic model and simulation system for the oxygen-enriched bottom-blowing lead oxidation smelting process using the MetCal software platform (MetCal v7.81) according to the chemical equilibrium constant method. The equilibrium products composition and important technical indicators were calculated under factory operating conditions. Compared with the industrial data, the calculation results demonstrated that the average relative error of the calculation value of the mass fraction in the crude lead, lead-rich slag, and dust was 3.76%. The average relative error of important technical indicators, including dust rate, crude lead yield, lead-rich slag temperature, slag iron–silica ratio (RFe/SiO2), and slag calcium–silica ratio (RCaO/SiO2), was 6.39%. As a result, the developed modeling and simulation system was able to reflect the current state of the oxygen-enriched bottom-blowing lead smelting. It also demonstrated the potential to enhance the smelting process and optimize the process parameters. Therefore, it is expected to provide a useful tool for thermodynamic analysis.