异质结
光电流
材料科学
三元运算
热液循环
纳米棒
带隙
化学工程
化学浴沉积
沉积(地质)
纳米技术
光电子学
计算机科学
工程类
程序设计语言
古生物学
沉积物
生物
作者
Dekang Liu,Wei Jin,Liyuan Zhang,Qiujie Li,Qian Sun,Yishan Wang,Xiaoyun Hu,Hui Miao
标识
DOI:10.1016/j.jallcom.2023.172926
摘要
Antimony sulfide (Sb2S3) is widely used in photocatalysts and photovoltaic cells because of its abundant reserves, low toxicity, environmental friendliness, narrow band gap, and high light absorption capacity. Sb2S3 shows a quasi-one-dimensional structure composed of [Sb4S6]n nanoribbons, a lot of reported studies are focused on preparing Sb2S3 with [hk1] oriented dominant growth to improve the photogenerated carrier transport capacity of Sb2S3. However, there is relatively few research on the preparation of [hk1] oriented rod-like Sb2S3 by vapor transport deposition (VTD) method. In this work, the VTD method was used to prepare Sb2S3 with [hk1] oriented growth on the FTO substrate, and then composite with the ternary solid solution CdxZn1−xS. Finally, a novel Sb2S3/Cd0.6Zn0.4S S-scheme heterojunction with rod-like core-shell structure was successfully constructed, which could effectively improve the photoelectrochemical properties. Because the solid solution component x is adjustable, that is, CdxZn1−xS has continuously adjustable band gap width and energy level position, the Sb2S3/CdxZn1−xS heterojunction type can be regulated from Type-II to S-scheme. Photoelectrochemical (PEC) tests indicated that the composite photoanode Sb2S3/Cd0.6Zn0.4S achieved a higher photocurrent density (2.54 mA·cm−2, 1.23 V vs. RHE), which is about 4.31 times that of pure Sb2S3 nanorod photoanode (0.59 mA·cm−2, 1.23 V vs. RHE).
科研通智能强力驱动
Strongly Powered by AbleSci AI