材料科学
图层(电子)
马氏体
变形(气象学)
复合材料
断裂(地质)
冶金
微观结构
作者
Ryusei Kato,Norimitsu Koga,Chihiro Watanabe
标识
DOI:10.1007/s11661-025-07711-w
摘要
Abstract Martensitic ( α ′) steel/Cu multilayered sheets with a volume fraction of 80 pct α ′ steel were tempered, and the deformation and fracture behavior of these sheets were systematically investigated. The microstructural features such as prior austenite grain and block sizes in the α ′ layer of the multilayered sheet were identical to those in the single-layer sheets. The multilayered sheets exhibited larger fracture elongation with a characteristically large local strain than the α ′ steel single-layer sheets. Inhomogeneous strain distributions developed in all the sheets during tensile deformation, but the strain distributions of multilayered sheets were more inhomogeneous than that of α ′ steel single-layer sheets. Strain bands, in which high-strain regions were continuously aligned along approximately 45 deg in the tensile direction, developed in all the sheets during deformation. Microvoids often nucleated at the intersections of strain bands, and their number density in multilayered sheets was lower than that in α ′ steel single-layer sheets, resulting in a lower number density of microvoids. Therefore, it can be concluded that laminating with Cu decreased the number density of strain bands and suppressed void nucleation in the α ′ steel layers, hindering the fatal fracture of the α ′ steel/Cu multilayered sheets.
科研通智能强力驱动
Strongly Powered by AbleSci AI