镍
氢氧化物
阳极
电解
材料科学
离子交换
多孔性
图层(电子)
化学工程
无机化学
膜
离子
化学
冶金
电极
复合材料
电解质
有机化学
生物化学
物理化学
工程类
作者
Sun Young Kang,Ji Eun Park,Ok‐Hee Kim,Hyuckjae Choi,Hosung Choi,Hee Ji Choi,Gyusik Chae,Dae-Hyun Lee,Yong‐Hun Cho,Gilho Kim,Yung‐Eun Sung
标识
DOI:10.1021/acsaem.4c03217
摘要
The development of high-performance and durable electrodes using anion-exchange membrane water electrolyzers (AEMWEs) is essential for sustainable and highly efficient hydrogen production. In this study, we developed a three-dimensional (3D) porous nickel–iron oxyhydroxide (NiFeOOH) anode for an AEMWE. The porous NiFeOOH layer was directly fabricated onto Ni foam by a one-step electrodeposition process with a pulse current (PC) application without the presence of a nonelectrically conductive ionomer. In addition, the effect of the PC electrodeposited anode on the AEMWE performance and durability was investigated by comparing other anodes (the electrodeposited anode using the direct current (DC) process and the conventional anode using the spraying method). This ionomer-free and porous anode showed a higher performance in reducing the Ohmic resistance than the electrodeposited anode with DC as the sprayed anode. The 3D porous structure enhanced the specific surface area and decreased the mass transport resistance. With those beneficial composition and structure, the AEMWE revealed superior performance, which showed 3.87 A cm –2 at 1.9 V and a small increased overpotential (11.1 mV h –1 ), compared to other anodes reported to date. 3D p -NiFe@NF was directly employed as a porous transport layer and catalyst layer with superior AEMWE performance and durability.
科研通智能强力驱动
Strongly Powered by AbleSci AI