材料科学
残余应力
静水压力
马氏体
奥氏体
复合材料
接触力学
极限抗拉强度
流体静力平衡
变形(气象学)
应力场
冶金
结构工程
机械
有限元法
微观结构
工程类
量子力学
物理
摘要
The material response to rolling contact loading has been analyzed using quantitative X-ray diffraction methods. This has led to the discovery of preferred crystalline orientation in very narrow subsurface regions of endurance-tested 6309 deep groove ball bearing inner rings. The high hydrostatic pressure field, derived from the load-induced three-dimensional stress field in each Hertzian contact load cycle, allows substantial microplastic deformation to be accommodated in the subsurface layers. This microplastic deformation is accompanied by transformation of retained austenite, decay of martensite and the development of texture and residual stresses, one of which is a subsurface tensile stress in a direction normal to the surface. Both the preferred orientation and the tensile residual stress allow for crack propagation parallel to the rolling contact surface. Based on these findings, an outline of a qualitative model for rolling contact fatigue is presented.
科研通智能强力驱动
Strongly Powered by AbleSci AI