硫脲
钙钛矿(结构)
能量转换效率
碳纤维
图层(电子)
载流子寿命
材料科学
空位缺陷
电子迁移率
光电子学
化学工程
化学
纳米技术
复合材料
结晶学
有机化学
硅
工程类
复合数
作者
Qingchen He,Haiming Zhang,Siqi Han,Rufeng Wang,Yujie Li,Xianjing Zhang,Yuwen Xing
标识
DOI:10.1021/acsaem.1c01918
摘要
In recent years, SnO2 has been widely studied as the electron-transport layer (ETL) of carbon-based CsPbIBr2 perovskite solar cells (PSCs). However, the large lattice mismatch between the SnO2 ETL and the CsPbIBr2 layer and the oxygen vacancy cause nonradiative recombination. Therefore, how to remove the defects between the SnO2 film and the CsPbIBr2 layer is the key to improving the performance. In this paper, thiourea (CH4N2S) is introduced into the SnO2 film as a carrier of S2– (Lewis base), which can capture Pb2+ at the interface between the SnO2 film and the CsPbIBr2 film, so as to reduce the nonradiative recombination between the CsPbIBr2 layer and the ETL and reduce the internal resistance of PSCs. The quality of the perovskite layer is also improved by increasing the size of the crystal, reducing the number of holes, and promoting the transmission ability of the carrier. The results show that the best power conversion efficiency (PCE) obtained by modifying the SnO2 ETL with thiourea (CH4N2S) is 7.18% (41.06% higher than that of the unmodified original PSC). In addition, the PSCs based on the ETL modified by thiourea (CH4N2S) have better stability in the natural environment in contrast to the original PSCs. This paper demonstrated an effective strategy to improve the stability and efficiency of all-inorganic CsPbIBr2 PSCs.
科研通智能强力驱动
Strongly Powered by AbleSci AI