材料科学
复合材料
石墨烯
氮化硼
热导率
氧化物
硅烷
填料(材料)
电介质
介电损耗
热固性聚合物
制作
聚合物
纳米技术
替代医学
冶金
病理
医学
光电子学
出处
期刊:Polymer Testing
[Elsevier BV]
日期:2021-10-28
卷期号:104: 107402-107402
被引量:26
标识
DOI:10.1016/j.polymertesting.2021.107402
摘要
Polymer composites have attracted considerable attention due to their easy processability, low cost, and various applications. However, intrinsic poor thermal, electrical properties of polymer always have been the bottlenecks of multifunctional technical development. In this study, fabrication of low dielectric loss and highly thermal conductive composites was investigated through hybridization of silane-treated reduced graphene oxide (rGO) and boron nitride (BN), sintering of silver nanoparticles (AgNPs) on the surface of two-dimensional fillers, and infiltration of poly(dimethylsiloxane) (PDMS). The well-ordered filler structure was achieved by aligned BN on the rGO surface. The aligned PDMS/BNA-SrGOA composites, which form heat transfer paths along the filler orientation of two-dimensional BN and GO, exhibited high thermal conductivities of 10.91 and 1.27 W/mK according to in-plane and through-plane direction in a 1:2 ratio of BN and rGO. In addition, the dielectric loss was decreased by interaction with BN compared to that with only the rGO composites. Finally, the treatment of a silane coupling agent on the rGO surface reduced the interface resistivity between the filler and matrix, which reinforced the thermal, electrical, mechanical properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI