Physical, Mechanical, and Environmental Properties of Corn Stalk Fiber Reinforced Braking Composites Prepared by Wet Granulation

Due to the increasing concern with the environmental safety and recyclability, natural fiber-reinforced composites have attracted more and more attention. In the present work, braking composite samples with and without wet granulation were fabricated and their physical, mechanical, and environmental properties were investigated systematically. The experimental results showed that the use of the wet granulation technology did not improve significantly the water absorption and impact strength properties of the braking composite samples but considerably improved their density and environmental performance in comparison to the braking composite sample without wet granulation, especially the environmental performance. Among the braking composite samples with wet granulation, with the decreasing of the resin contents, the density was decreased gradually, the water absorption was decreased and then increased, and the impact strength was increased. Samples FG-13 and FG-11 had a relatively low dust capacity, and sample FG-5 was the highest. The method of the braking composite preparation in the present work may serve as a useful guide to produce a strong low-resin environmental-friendly composite for automotive components.