Effect of Cooling Rate on the Microstructure and Mechanical Properties of Fe-Mn-Al-C Light-Weight Steels

The effects of cooling after solution heat treatment on the microstructure and mechanical properties of light-weight steels were investigated using Fe-30Mn-xAl-0.9Calloys containing 9.0-12.8wt% Al.Lab-scale specimens (thickness: 10 mm) of the alloys were cooled by different cooling rates from -337 to -0.053 ℃/s using water, air, and furnace cooling.As the cooling rate decreased, hardness of the alloys increased due to precipitation of κ-carbides.However, reduction of the cooling rate induced the growth of intergranular κ-carbides.This resulted in the decrease of impact absorbed energy of the alloys at room temperature, and exhibited intergranular brittle fracture behavior.The 12.8 wt% Al alloy cooled at the slowest cooling rate in particular showed the formation of β-Mn.To estimate the cooling rates of large-scale slabs of light-weight steels, finite element simulations were conducted.The cooling rates at the center of the slab under air and water cooling (free convection) were calculated to be -0.049 and -0.15 ℃/s, respectively.The results indicated that water cooling could prevent the excessive formation of κ-carbides/β-Mn during fabrication of large-scale slabs of alloys containing an Al content lower than 10.5 wt%.