材料科学
聚二甲基硅氧烷
压力传感器
电容感应
电容器
触觉传感器
生物医学工程
电介质
压力测量
光电子学
电子工程
电气工程
纳米技术
计算机科学
电压
工程类
机械工程
人工智能
机器人
作者
Wen-Jun Deng,Li-Feng Wang,Lei Dong,Qing‐An Huang
标识
DOI:10.1109/jsen.2018.2831229
摘要
Mechanical pressures affect the rate and quality of dermal wound healing. It is therefore important to continuously monitor the mechanical pressure on a wound site so as to evaluate neovascularization and cellular proliferation under pressure. Based on an LC (inductor-capacitor) passive wireless principle, this paper presents the design, fabrication, and measurement of LC sensors embedded in a commercial bandage. Pyramidal polydimethylsiloxane elastomers used as the dielectric of the capacitive pressure sensor were fabricated by using a silicon anisotropic etching mold. Simulation and analysis of the LC sensor and wound environment effects were performed. The sensor embedded in the bandage stuck on the skin was measured, showing that its resonant frequency changes according to a linear function of applied pressure in a range of 0-200 mmHg with a sensitivity of -270.8 kHz/mmHg. The demonstrated LC sensor is completely flexible and wearable, which is proper for the future smart bandage.
科研通智能强力驱动
Strongly Powered by AbleSci AI