材料科学
导线
导电体
制作
压实
超导电性
有限元法
变形(气象学)
复合材料
弯曲
降级(电信)
管(容器)
过程(计算)
紧迫的
扭转
理论(学习稳定性)
结构工程
航程(航空)
拉伤
电流(流体)
机械工程
弯曲分子几何
工作(物理)
制造工艺
压力(语言学)
作者
Yifeng Li,Yangyang Shi,Shaotao Dai,Jingxian Li,Ziqi Song,Kaibin Zhu
标识
DOI:10.1088/1361-6668/ae8b34
摘要
A systematic investigation of the fabrication process and performance evolution of a copper-tube-reinforced conductor-on-round-core cable-in-conduit conductor (CORC-CICC) is presented through combined experiments and finite element simulations. A continuous manufacturing route covering subcable winding, diameter compaction, and final cabling is successfully implemented, enabling the fabrication of reinforced CORC-CICC conductors with stable mechanical structure and well-preserved electrical performance. Experimental results show that the compaction process plays a key role in determining the mechanical stability and superconducting performance of the CORC subcable. Excessive diameter reduction leads to noticeable degradation in both critical current and n -value, whereas properly optimized compaction parameters allow the subcable to be firmly constrained within the copper tube while maintaining good current-carrying capability. Subsequent cabling experiments with twist pitches ranging from 400 to 600 mm demonstrate that the conductors exhibit very limited performance degradation after cabling, indicating that the selected pitch range can effectively preserve the superconducting properties. Finite element simulations are further conducted to analyze the mechanical response of the superconducting tapes during the cabling process. The results show that the strain distribution among different tape layers is non-uniform, with localized variations appearing in intermediate layers. Nevertheless, the calculated layer-wise current retention remains above 98.5% for all investigated pitches, which is consistent with the experimentally observed stable performance. The analysis also indicates that larger twist pitches lead to slightly reduced strain levels and a more uniform mechanical state. These results provide a comprehensive understanding of the relationship between fabrication-induced mechanical deformation and superconducting performance in CORC-CICC conductors, and offer useful guidance for the optimization of compaction parameters and cabling pitch in practical conductor design.
科研通智能强力驱动
Strongly Powered by AbleSci AI