材料科学
极限抗拉强度
选择性激光熔化
延展性(地球科学)
合金
再现性
产量(工程)
复合材料
制作
冶金
微观结构
统计
病理
蠕动
医学
替代医学
数学
作者
Konda Gokuldoss Prashanth,S. Scudino,Riddhi Chatterjee,Omar Salman,Jürgen Eckert
出处
期刊:Technologies (Basel)
[Multidisciplinary Digital Publishing Institute]
日期:2017-02-22
卷期号:5 (1): 8-8
被引量:58
标识
DOI:10.3390/technologies5010008
摘要
The present study deals with the properties of five different metals/alloys (Al-12Si, Cu-10Sn and 316L—face centered cubic structure, CoCrMo and commercially pure Ti (CP-Ti)—hexagonal closed packed structure) fabricated by selective laser melting. The room temperature tensile properties of Al-12Si samples show good consistency in results within the experimental errors. Similar reproducible results were observed for sliding wear and corrosion experiments. The other metal/alloy systems also show repeatable tensile properties, with the tensile curves overlapping until the yield point. The curves may then follow the same path or show a marginal deviation (~10 MPa) until they reach the ultimate tensile strength and a negligible difference in ductility levels (of ~0.3%) is observed between the samples. The results show that selective laser melting is a reliable fabrication method to produce metallic materials with consistent and reproducible properties.
科研通智能强力驱动
Strongly Powered by AbleSci AI