界面聚合
聚酰胺
哌嗪
傅里叶变换红外光谱
膜
水溶液
纳滤
聚合
化学工程
基质(水族馆)
氯化物
渗透
高分子化学
原位聚合
材料科学
化学
聚合物
有机化学
单体
工程类
地质学
海洋学
生物化学
出处
期刊:Membranes
[Multidisciplinary Digital Publishing Institute]
日期:2020-01-07
卷期号:10 (1): 12-12
被引量:43
标识
DOI:10.3390/membranes10010012
摘要
The interfacial polymerization (IP) of piperazine (PIP) and trimesoyl chloride (TMC) has been extensively utilized to synthesize nanofiltration (NF) membranes. However, it is still a huge challenge to monitor the IP reaction, because of the fast reaction rate and the formed ultra-thin film. Herein, two effective strategies were applied to reduce the IP reaction rate: (1) the introduction of hydrophilic interlayers between the porous substrate and the formed polyamide layer, and (2) the addition of macromolecular additives in the aqueous solution of PIP. As a result, in situ Fourier transform infrared (FT-IR) spectroscopy was firstly used to monitor the IP reaction of PIP/TMC with hydrophilic interlayers or macromolecular additives in the aqueous solution of PIP. Moreover, the formed polyamide layer growth on the substrate was studied in a real-time manner. The in situ FT-IR experimental results confirmed that the IP reaction rates were effectively suppressed and that the formed polyamide thickness was reduced from 138 ± 24 nm to 46 ± 2 nm according to TEM observation. Furthermore, an optimized NF membrane with excellent performance was consequently obtained, which included boosted water permeation of about 141–238 (L/m2·h·MPa) and superior salt rejection of Na2SO4 > 98.4%.
科研通智能强力驱动
Strongly Powered by AbleSci AI