旋转温度
托卡马克
温度电子
辐射传输
原子物理学
等离子体
平均运动温度
发射光谱
质子
谱线
材料科学
物理
光学
核物理学
天文
作者
Nao Yoneda,T. Shikama,F. Scotti,K. Hanada,H. Iguchi,H. Idei,T. Onchi,A. Ejiri,T. Ido,K. Kono,Yi Peng,Yusuke Osawa,G. Yatomi,Akihiro Kidani,Masaki Kudo,Ryosuke Hiraka,K. Takeda,R. E. Bell,A. Maan,Dennis Boyle
出处
期刊:Nuclear Fusion
[IOP Publishing]
日期:2023-05-12
卷期号:63 (9): 096004-096004
被引量:5
标识
DOI:10.1088/1741-4326/acd4d1
摘要
Abstract Spatially resolved rotational temperature of ground state hydrogen molecules desorbed from plasma-facing surface was measured in QUEST, LTX-β, and DIII-D tokamaks, and the increases of the rotational temperature with the surface temperature and due to collisional-radiative processes in the plasmas were evaluated. The increase due to collisional-radiative processes was calculated by solving rate equations considering electron and proton collisional excitation and deexcitation and spontaneous emission. The calculation results suggest a high sensitivity for the rotational temperature to electron and proton densities, but a negligible sensitivity to the electron, proton, and surface temperatures. In the three tokamaks with different plasma parameters and plasma-facing surface materials, the spatial profile of the rotational temperature was estimated using Fulcher-α emission lines (600–608 nm). In QUEST, the spatial profile of the rotational temperature was estimated from spatially resolved spectra. In the other tokamaks, the rotational temperature was evaluated assuming a single point emission with a location determined from the Fulcher-α emission profile as measured with a filtered camera. In metal-walled devices QUEST and LTX-β, the rotational temperature increased with the surface temperature, and the calculated collisional-radiative increase is consistent with measured increase assuming that the rotational temperature at the surface is approximately 500–600 K higher than the surface temperature. In DIII-D with carbon walls, a larger collisional-radiative increase than the other tokamaks was observed because of the higher density leading to a large difference from the calculated increase compared to the other smaller tokamaks. Measurement of the Fulcher-α emission profile with higher spatial resolution in DIII-D may reduce the difference and reveal the effect of the surface temperature on the rotational temperature. These results show the increases in the rotational temperature with the surface temperature and due to the collisional-radiative processes.
科研通智能强力驱动
Strongly Powered by AbleSci AI