Machining error prediction scheme aided smart fixture development in machining of a Ti6Al4V slender part

机械加工 固定装置 执行机构 机械工程 有限元法 机床 刚度(电磁) 工程类 计算机科学 结构工程 人工智能
作者
Shulong Liu,Shukri M. Afazov,Adib A. Becker,Svetan M. Ratchev
出处
期刊:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture [SAGE Publishing]
卷期号:237 (10): 1509-1517 被引量:13
标识
DOI:10.1177/09544054221136520
摘要

Machining of slender (low rigidity) parts is associated with tool/workpiece deflections due to induced cutting forces resulting in machining error (dimensional inaccuracy of the machined surface). The development of smart fixtures is seen as an enabler for reduction of machining error. To reduce lead times, the smart fixtures need to be designed in an efficient way by using more virtual simulations and less physical iterations. This paper presents the development of a novel methodology for machining error prediction in milling of a fixture-workpiece system. The methodology integrates a cutting force model, a finite element based fixture-workpiece system and a multi-step error predictive approach. The methodology was first validated on a flexible thin-wall Ti6Al4V slender part where less than 6% difference was achieved between predicted and measured machining error. The difference between predicted and measured cutting forces was approximately 6%. After the gained confidence, the methodology was applied to the flexible thin-wall Ti6Al4V slender part encompassed by a fixture with three actuators acting as supports. The predicted machining error was reduced from the range of 0.2–0.33 mm (no actuators) to the range of 0.12–0.14 mm (with three actuators). This demonstrated the capability of the developed methodology to aid the design of future smart fixtures with the potential to reduce lead times during their development.
最长约 10秒,即可获得该文献文件

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
昔年完成签到 ,获得积分10
1秒前
2秒前
称心青亦发布了新的文献求助10
3秒前
3秒前
3秒前
4秒前
5秒前
LN发布了新的文献求助30
6秒前
7秒前
7秒前
7秒前
科研通AI6.3的应助被XZM采纳,获得10
7秒前
8秒前
水天需发布了新的文献求助10
8秒前
banyingmm完成签到,获得积分10
9秒前
勤恳成威发布了新的文献求助10
9秒前
Nole的应助被王浩采纳,获得10
9秒前
10秒前
正直的夏青完成签到,获得积分20
10秒前
11秒前
xialuoke完成签到,获得积分10
11秒前
12秒前
111发布了新的文献求助10
13秒前
13秒前
banyingmm发布了新的文献求助10
14秒前
111完成签到,获得积分10
14秒前
我是老大的应助被贾永芳采纳,获得10
15秒前
儒雅一凤发布了新的文献求助10
15秒前
16秒前
煮香芋完成签到,获得积分10
17秒前
水天需发布了新的文献求助10
17秒前
17秒前
szhfendou发布了新的文献求助10
18秒前
Orange的应助被陈月亮采纳,获得10
18秒前
19秒前
123123完成签到 ,获得积分10
19秒前
19秒前
北漠狐发布了新的文献求助10
20秒前
趁风静完成签到 ,获得积分10
20秒前
vivi完成签到 ,获得积分10
21秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 1700
The World Atlas of Wine 9th edition 1000
奈特基础组织学:配套组织病理学(第4版)(Netter's Essential Histology With Correlated Histopathology) 800
八旗制度の研究 600
Improving the wear resistance of vehicle gear oil by oil soluble LaF3 nanoparticles and typical additives of gear oil 500
Boundaries and Bodhisattvas 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8183923
求助须知:如何正确求助?哪些是违规求助? 9573132
关于积分的说明 21829461
捐赠科研通 7781024
什么是DOI,文献DOI怎么找? 3434150
关于科研通互助平台的介绍 2558333
邀请新用户注册赠送积分活动 2480648