材料科学
涂层
电镀
复合材料
聚氨酯
合金
多孔性
抗压强度
压力降
电镀(地质)
金属泡沫
超声波传感器
图层(电子)
物理
地球物理学
热力学
地质学
声学
作者
Raj Kumar Pittala,Priyaranjan Sharma,Gajanan Anne,Sachinkumar Patil,Vinay Varghese,Sudhansu Ranjan Das,Ch Sateesh Kumar,Filipe Fernandes
出处
期刊:Coatings
[Multidisciplinary Digital Publishing Institute]
日期:2023-05-28
卷期号:13 (6): 1002-1002
被引量:12
标识
DOI:10.3390/coatings13061002
摘要
Metal foams and alloy foams are a novel class of engineering materials and have numerous applications because of their properties such as high energy absorption, light weight and high compressive strength. In the present study, the methodology adopted to develop a Ni-Cr alloy foam is discussed. Polyurethane (PU) foam of 40PPI (parts per inch) pore density was used as the precursor and coating techniques such as electroless nickel plating (ELN), ultrasonic-assisted electroplating of nickel (UAEPN), and pack cementation or chromizing were used to develop the Ni-Cr alloy foam. The surface morphology, strut thickness and minimum weight gain after each coating stage were evaluated. It was observed from the results that the adopted coating techniques did not damage the original ligament cross-section of the PU precursor. The minimum weight gain and the coating thickness after the UAEPN process were observed to be 42 g and 40–60 μm, respectively. The properties such as porosity percentage, permeability and compressive strength were evaluated. Finally, the pressure drop through the developed foam was estimated and verified to determine whether the developed foam can be used for filtering applications.
科研通智能强力驱动
Strongly Powered by AbleSci AI