五元
材料科学
高熵合金
层错能
合金
延展性(地球科学)
冶金
位错
产量(工程)
临界切应力
热力学
结晶学
蠕动
复合材料
流变学
物理
化学
剪切速率
作者
Zhongding Fan,Le Li,Zhenghao Chen,Makoto Asakura,Chi Zhang,Zhigang Yang,Haruyuki Inui,E.P. George
出处
期刊:Acta Materialia
[Elsevier BV]
日期:2023-03-01
卷期号:246: 118712-118712
被引量:3
标识
DOI:10.1016/j.actamat.2023.118712
摘要
The temperature-dependent yield strengths of [1¯23]-oriented single crystals of four quinary non-equiatomic Cr-Mn-Fe-Co-Ni high-entropy alloys (HEAs) were investigated at temperatures of 10-1173 K. They exhibit similar trends with a rapid decrease of the critical resolved shear stress (CRSS) from 10 K to 300 K, followed by a much slower rate of decrease with increasing temperature and a plateau above 873 K. The HEAs with the highest and lowest Cr contents exhibit the highest and lowest yield strengths respectively at 10 K, but almost identical yield strengths at 300 K. Thus, at cryogenic temperatures, the magnitude of the temperature dependence of yield strength is positively correlated with Cr content. All the non-equiatomic HEAs also exhibit similar dislocation structures with planar arrays of smoothly-curved dislocations without any preferred orientations. Their stacking fault energy (SFE) decreases with increasing Cr content. An empirical expression is proposed to describe the composition dependence of SFE in the Cr-Mn-Fe-Co-Ni quinary system. A new route for optimizing the alloy design of non-equiatomic Cr-Mn-Fe-Co-Ni alloys in terms of strength and ductility through the combination of mean-square atomic displacement (MSAD) and SFE is discussed based on the results obtained.
科研通智能强力驱动
Strongly Powered by AbleSci AI