Comparison of single- and hybrid-fiber composite laminates for use in prosthetic sockets

Traditional prosthetic sockets often consist of thermoplastic and wood-based materials. However, these sockets are known to be uncomfortable, heavy, and economically challenging. Natural fibers are quickly adapting and becoming more popular because of their biodegradable, long-lasting, and biocompatible nature. They are replacing synthetic fibers in the design and development of structural parts. This research looked into a new hybrid composite made of natural and synthetic fibers (basalt, jute, and carbon) that are reinforced in a polyester thermoset based matrix. The performance of this hybrid composite was then compared to that of pristine or single fiber-reinforced composites manufactured using woven jute, basalt, and carbon. The samples were manufactured using the vacuum-assisted resin transfer molding technique and cured at room temperature. The samples were then subjected to flexure and impact tests. The hybrid composite had an impact strength of 46.71 kJ/m 2 , higher than all other single fiber combinations. The flexural strength of the hybrid composite was determined to be 66.25 MPa, matching that of basalt fiber and surpassing that of other conventional single fiber composite laminates. Fractographic analysis has revealed that the main cause of failure in flexure is mostly attributed to delamination and fiber micro-buckling. Although hybrid reinforced composites had superior performance in terms of both impact and flexure strength, basalt fibers demonstrated comparable strength, specifically in flexure. Overall, the hybrid composite possesses exceptional promise for use in prosthetic construction.