高温合金
材料科学
冶金
腐蚀
合金
碳化物
高温腐蚀
管式炉
氧化物
熔盐
重量变化
碳化硅
电子探针
化学工程
内科学
工程类
医学
肥胖
减肥
作者
Gitanjaly Goyal,Niraj Bala,Harpreet Singh,Satya Prakash
标识
DOI:10.1080/09603409.2023.2171546
摘要
High temperature corrosion of metals and alloys can be controlled by the use of inhibitors and fuel additives. In this work three different types of coatings namely Y2O3, SnO2 and ZrO2 coatings were superficially applied on Ni base superalloy Superni 718. Accelerated corrosion testing of the uncoated as well as the coated superalloy was done in a molten salt environment (Na2SO4-60%V2O5) at 900°C for 50 cycles. Each cycle consisted of 1 hour heating in a Silicon Carbide Tube furnace followed by 20 minutes cooling in ambient air. Weight change measurements after each cycle were taken by an electronic balance having an accuracy of 0.01 mg. XRD, SEM and EPMA analyses of the exposed specimens were carried out to characterise the oxide scales. The bare superalloy showed more overall weight gain, in comparison with all the coated counterparts. It was concluded that ZrO2 was most effective in reducing corrosion rate in alloy A.
科研通智能强力驱动
Strongly Powered by AbleSci AI