Investigating the multiscale effects of a novel post–weld composite processing treatment on minimizing weld softening in AA6061-T6 Al–alloy

The fusion welding of heat-treatable AA6061-T6 aluminum alloy results in significant joint softening which results in the ultimate tensile strength (UTS) and elongation (El) of the welded joint only reaching up to 60–70% and 40–50% of the base metal (BM), respectively. A post–weld composite processing treatment (PWCPT) that uses solution treatment (ST), artificial aging treatment (AT) and cold rolling (CR) has been proposed in this study to mitigate this issue. The effect of different composite process sequences and parameters on the microstructural characteristics and mechanical properties of the joints were investigated. The results show that the formation of the fine-grained microstructure in the fusion zone (FZ) and abnormal sandwich microstructure in the heat-affected zone (HAZ) was highly dependent on the dislocation density and fraction of the insoluble phases. By clarifying the strain characteristics of the joints, a strategy was developed to optimize the homogeneity of the microhardness distribution which improves joint ductility. The optimal PWCPT involved the ST and AT for the AA6061-T6 joint that was produced by tungsten inert gas (TIG) welding with filler wire, with subsequent cold rolling of the weld reinforcement to achieve a rolling reduction of 1.2 mm. The PWCPT could completely eliminate joint softening and improved the joint UTS and El to 100% and 88.6% of the BM, respectively. By systematically expounding the evolution law of microstructure and mechanical properties of the welded joint under the coupling of thermal and mechanical, the strengthening mechanism of the PWCPT is revealed.