Effects of Ultraviolet Light Irradiation on Silk Fibroin Films Prepared under Different Conditions

Silk fibroin (SF)-based materials are exposed to both natural and artificial ultraviolet (UV) light during preparation or administration. However, the effects of UV irradiation on SF films prepared under different conditions have not yet been described in detail. In this study, four SF films with different molecular weight (MW) distribution were fabricated using SF solutions, which were prepared by dissolving degummed SF for 0.5–24 h. We observed UV (365 nm) irradiation on SF films induced the increase of yellowness and absorbance at 310 nm of SF films, indicating the formation of new photo-products and di-tyrosine bonds by photo-oxidation. Due to di-tyrosine cross-links between SF chains, UV-irradiated SF films were not fully dissociated in urea solution. In addition to formation of new products, UV reduced the crystallinity of SF films by breaking hydrogen bonds of β-sheet conformation. Unlike the UV-induced decomposition of physical interactions, UV did not affect the covalent bonds (i.e., peptide bonds). Through these experiments, we could expect that SF with higher MW was more susceptible and SF with lower MW was more resistant to UV-induced photo-oxidation and photo-degradation. These results provide useful information about UV-induced aging of SF-based materials under natural sunlight and UV irradiating conditions.