熟料(水泥)
伯利特
材料科学
阿利特
硅酸盐水泥
矿物学
钛
固溶体
硅酸盐
硅酸钙
铝酸盐
X射线光电子能谱
二氧化钛
钛酸酯
水泥
冶金
化学工程
复合材料
化学
陶瓷
工程类
作者
Jinzhen Li,Geling Cheng,Shaowen Huang,Lei Huang
标识
DOI:10.1680/jadcr.19.00163
摘要
Titanium (Ti) is a common trace element in white Portland cement clinker. Ti 4+ generally replaces Si 4+ to form a solid solution in silicate minerals, which has an important influence on the mineral crystal form of white cement clinker. In this paper, the effects of Ti on the mineral composition and solid solution characteristics of white Portland cement clinker were studied by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy–energy dispersive X-ray spectroscopy (SEM-EDS) and Rietveld quantitative analysis. The results showed that the incorporation of titanium dioxide (TiO 2 ) stabilised the highly active α′ H -belite (C 2 S), but over 1% will form calcium titanate (CaTiO 3 ) The crystal form of alite (C 3 S) was T3→M1→M3→R with the increase of titanium dioxide content. Ti elements tended first to be solid soluble in the intermediate phase, then C 2 S, and finally C 3 S. The content of Ti in α′ H -C 2 S was higher than that in β-C 2 S. With the increase of titanium dioxide content, the calcium–silicon ratio of C 2 S decreased first and then increased. In silicate minerals, Ti 4+ replaced Si 4+ to form titanate [TiO 4 ]. The Ca 2+ ion in α′ H -C 2 S was placed in a more electronegative environment, resulting in a larger binding energy of electrons in the 2p orbit.
科研通智能强力驱动
Strongly Powered by AbleSci AI