Simultaneous and Efficient Removal of Oleophilic and Hydrophilic Stains from Polyurethane by the Combination of Easy-Cleaning and Self-Cleaning

The simultaneous and efficient removal of oleophilic and hydrophilic stains from polyurethane (PU) is realized by combining the easy-cleaning from the hydrophilic thermoresponsive hydrogel coating containing acrylamide (AAm), gum arabic (GA), and (ethylene glycol) methyl ether methacrylate (OEGMA300) P(GA/AAm/OEGMA300) and the self-cleaning from the embedded nonmetallic photocatalyst g-C3N4. Due to the existence of strong hydrogen bonds between the hydroxyl groups in the hybrid hydrogel coating and the hydroxyl/carboxyl groups in the plasma-treated PU, the hybrid hydrogel coating is very stable on PU. Simultaneously, the acrylamide network in the hybrid hydrogel coating enhances its mechanical strength. Because the transition temperature of OEGMA300 is well above the room temperature, the cross-linked coating remains hydrophilic in ambient conditions. Thus, oleophilic stains, such as oil and grease, can be easily removed from the coating surface. In addition, the embedded photocatalyst g-C3N4 in the hybrid hydrogel coating introduces the extra capability of decomposing organic compounds under sunshine, which favors the removal of hydrophilic stains such as dyes and wines. After sunlight illumination and simply rinsing with water, both hydrophilic and oleophilic stains can be easily removed. Moreover, this joint cleaning performance can work for a long time. Even after four consecutive cycles, both the easy-cleaning to oleophilic stains by the hydrophilic hydrogel surface and self-cleaning to the hydrophilic stains by the embedded g-C3N4 remain unchanged.