材料科学
响应度
聚苯胺
X射线光电子能谱
分析化学(期刊)
高分辨率透射电子显微镜
铁酸盐
光电探测器
纳米技术
化学
透射电子显微镜
聚合
物理化学
光电子学
核磁共振
聚合物
物理
吸附
色谱法
复合材料
作者
Anshika Singh,Arpit Verma,B. C. Yadav,Pratima Chauhan
出处
期刊:Dalton Transactions
[Royal Society of Chemistry]
日期:2022-01-01
卷期号:51 (20): 7864-7877
被引量:34
摘要
Nickel-zinc iron oxide (NZF) was introduced into a polyaniline (PANI) matrix by an in situ chemical oxidation polymerization approach. The surface composition and chemical states were investigated by X-ray photoelectron spectroscopy (XPS), which revealed an Fe 2p spectrum with the two peak positions of Fe 2p3/2 and Fe 2p1/2 at 711.00 and 724.48 eV, respectively. Deconvolution of the Fe 2p3/2 peak revealed two components with binding energies of 713.98 and 718.16 eV, corresponding to the presence of Fe cations in the octahedral and tetrahedral sites. Additionally, the Rietveld refinement of NZF showed a cubic system with the Fd3m space group. High-resolution transmission electron microscopy (HRTEM) analysis showed that the NZF material strongly interacts with polyaniline, while the selected area electron diffraction (SAED) pattern perfectly matched with the XRD data. Lognormal distribution was used to determine the particle size, which was found to be in the range of 1-100 nm. A flexible photodetector device utilizing the NZF-PANI nanohybrid was fabricated on an environmentally friendly, biodegradable cellulose paper substrate and the device exhibited excellent performance, i.e., a responsivity of 0.069 A W-1 and detectivity of 7.258 × 1010 Jones at a very low voltage of 0.1 V. The non-stretched device showed a responsivity of 24.980 A W-1 at 5 V, whereas at 2 cm-1 bending curvature, the device showed a responsivity of 20.175 A W-1, which was much higher than the responsivity of a commercial photodetector (<0.5 A W-1).
科研通智能强力驱动
Strongly Powered by AbleSci AI