法拉第效率
材料科学
成核
电解质
锡
化学工程
导电体
箔法
金属锂
锂(药物)
碳纳米管
电池(电)
集电器
电流密度
纳米技术
沉积(地质)
金属
碳纤维
离解(化学)
图层(电子)
纳米颗粒
锂电池
电化学
电极
原子层沉积
相间
作者
Chaoyin Peng,L X Wang,Y W Li,Junxian Hu,Shaoze Zhang,Keyu Zhang,Jian Tang,Yunke Wang,Yaochun Yao
出处
期刊:Small
[Wiley]
日期:2026-06-08
卷期号:22 (42): e74079-e74079
摘要
Anode‐free lithium metal batteries (AFLMBs), with high energy density, low cost, and enhanced safety, are regarded as the next‐generation high‐energy‐density batteries. However, capacity decay and uncontrollable dendritic Li growth hinder its practical adoption. Hence, a Cu@TiN‐MWCNT interfacial layer was rationally designed on Cu foil to enable highly reversible Li deposition/stripping. TiN nanoparticles provide abundant lithiophilic sites to reduce the Li nucleation overpotential, while COOH‐functionalized multi‐walled carbon nanotubes construct a conductive network to decrease local current density and improve interfacial stability. Moreover, oxygen‐containing carboxyl groups promote lithium salt dissociation and facilitate the formation of a LiF‐rich solid electrolyte interphase, further stabilizing the electrode/electrolyte interface and suppressing dendritic Li growth. Benefiting from these synergistic effects, compact and uniform Li deposition is achieved. As a result, the Li/Cu@TiN‐MWCNT||LFP cell with a low N/P ratio of 2.1 maintains a specific capacity of 144.15 mAh g −1 after 150 cycles at 3 C. Additionally, the AFLMB exhibits a high‐capacity retention of 51.41% and coulombic efficiency of 98.67% after 80 cycles, which points out a new direction for the development of current collectors toward high‐performance AFLMBs.
科研通智能强力驱动
Strongly Powered by AbleSci AI