材料科学
原子层沉积
X射线反射率
石英晶体微天平
薄膜
分析化学(期刊)
无定形固体
钼
氮化物
椭圆偏振法
阳极
傅里叶变换红外光谱
化学工程
图层(电子)
纳米技术
电极
结晶学
冶金
化学
吸附
物理化学
有机化学
工程类
色谱法
作者
Dip K. Nandi,Uttam Kumar Sen,Devika Choudhury,Sagar Mitra,Shaibal Kanti Sarkar
摘要
Molybdenum nitride (MoNx) thin films are deposited by atomic layer deposition (ALD) using molybdenum hexacarbonyl [Mo(CO)6] and ammonia [NH3] at varied temperatures. A relatively narrow ALD temperature window is observed. In situ quartz crystal microbalance (QCM) measurements reveal the self-limiting growth nature of the deposition that is further verified with ex situ spectroscopic ellipsometry and X-ray reflectivity (XRR) measurements. A saturated growth rate of 2 Å/cycle at 170 °C is obtained. The deposition chemistry is studied by the in situ Fourier transform infrared spectroscopy (FTIR) that investigates the surface bound reactions during each half cycle. As deposited films are amorphous as observed from X-ray diffraction (XRD) and transmission electron microscopy electron diffraction (TEM ED) studies, which get converted to hexagonal-MoN upon annealing at 400 °C under NH3 atmosphere. As grown thin films are found to have notable potential as a carbon and binder free anode material in a Li ion battery. Under half-cell configuration, a stable discharge capacity of 700 mAh g(-1) was achieved after 100 charge-discharge cycles, at a current density of 100 μA cm(-2).
科研通智能强力驱动
Strongly Powered by AbleSci AI