极限载荷
有限元法
极限(数学)
喷嘴
非线性系统
结构工程
圆柱
有限元极限分析
极限分析
数学
工程类
机械工程
数学分析
混合有限元法
物理
量子力学
作者
Xiaohui Chen,Bingjun Gao,Xingang Wang
出处
期刊:Steel and Composite Structures
[Technopress]
日期:2016-12-30
卷期号:22 (6): 1391-1415
被引量:9
标识
DOI:10.12989/scs.2016.22.6.1391
摘要
Limit load of pressure bearing structures was reviewed in this article. By means of the finite element analysis, limit load of pressurized cylinder with nozzle was taken as an example. Stress classification method and Elastic-plastic finite element analysis combining with limit load determination methods were used to determine limit load of cylinder with nozzle. Comparison of limit load determined by different methods, the results indicated that limit load determined by linearization method was the smallest. Limit load determined by twice elastic slope criterion was the nearest than experimental results. Elastic-plastic finite element analysis had comparably computational precision, but required time consuming. And then the requirements of computer processing and storage capacity by power system became higher and higher. Most of criteria for limit load estimation included any human factors based on a certain substantive characteristics of experimental results. The reasonable criterion should be objective and operational.
科研通智能强力驱动
Strongly Powered by AbleSci AI