材料科学
烧结
电解质
放电等离子烧结
氧化钇稳定氧化锆
电导率
晶界
离子电导率
立方氧化锆
相对密度
固体氧化物燃料电池
晶粒生长
复合材料
粒度
冶金
化学工程
陶瓷
电极
微观结构
化学
物理化学
工程类
作者
X. J. Chen,Khiam Aik Khor,Siew Hwa Chan
标识
DOI:10.1179/174367605x16680
摘要
Spark plasma sintering (SPS) technology was adopted to reduce the detrimental effect of SiO2 and Cr2O3 contaminants on 8 mol-% yttria stabilised zirconia (YSZ) electrolyte. Contamination of SiO2 not only significantly reduces the ionic conductivity of the YSZ electrolyte, especially grain boundary conductivity, it also retards the densification process during sintering. Also, the addition of 0.5 wt-%Cr2O3, whilst marginally reducing grain boundary conductivity, can promote the densification process regardless of sintering technique adopted, be it conventional electrical resistance heating or SPS. The effects of SPS sintering conditions, such as sintering temperature, isothermal dwell time, applied uniaxial pressure and number of repeated SPS cycles on the relative density and ionic conductivity of the contaminated YSZ electrolytes were investigated in detail. The results showed that SPS sintering could alleviate the harmful effect of contaminants on grain boundary conductivity, with minimal effect on the grain interior conductivity. It can also sinter the YSZ electrolyte to near full density (about 98%) in around 3 min.
科研通智能强力驱动
Strongly Powered by AbleSci AI