多硫化物
催化作用
硫黄
氧化还原
化学工程
吸附
磷酸盐
磷酸
材料科学
无机化学
分离器(采油)
电池(电)
动力学
化学
密度泛函理论
资源回收
电解质
工作(物理)
废物管理
降级(电信)
钾离子电池
电极
烟气脱硫
储能
作者
Jiazheng Zong,Zhiqi Zhao,Yiqin Pan,Meng Qian,Yuhan Chang,Yangkun Ning,Yiyang Liu,Chaojiang Niu,Zhen Zhou
出处
期刊:
[Tsinghua University Press]
日期:2026-10-30
标识
DOI:10.26599/nre.2026.9120291
摘要
The growing accumulation of spent lithium-ion batteries (LIBs) presents significant environmental challenges, while the complex composition of battery waste complicates efficient resource recovery. Herein, a phosphoric acid-assisted upcycling strategy is developed to recover multimetallic constituents from spent LIBs and reconstruct them into multicomponent phosphate (R-MCP) catalysts for lithium-sulfur batteries, reducing the need for extensive component separation. The resulting R-MCP, containing Ni, Mn, Fe, Cu, and Al, exhibits favorable polysulfide adsorption and sulfur-conversion behavior compared with recycled Ni-Mn-Fe phosphate (R-NMP). Experimental characterizations and density functional theory calculations provide insights into the electronic interactions and favorable sulfur redox kinetics of R-MCP. Consequently, the R-MCP modified separator delivers an initial capacity of 1075 mAh g-1 at 0.5 C and stable cycling over 2000 cycles at 1 C, with a capacity decay rate of 0.029% per cycle. Stable cycling is also achieved at a sulfur loading of 10.14 mg cm-2. This work demonstrates a practical route for converting multimetallic battery waste into functional catalytic materials.
科研通智能强力驱动
Strongly Powered by AbleSci AI