铜
催化作用
单层
水煤气变换反应
色散(光学)
金属
材料科学
过渡金属
无机化学
降水
化学
化学工程
冶金
纳米技术
有机化学
气象学
工程类
物理
光学
作者
Jing Ning,Yan Zhou,Aling Chen,Yong Li,Shu Miao,Wenjie Shen
标识
DOI:10.1016/j.cattod.2019.07.048
摘要
Cu species in the forms of layers, clusters and particles were dispersed on a rod-shaped ceria by a deposition-precipitation method and the resulting Cu/CeO2 catalysts were tested for the low-temperature water-gas shift reaction. The structural, chemical and surface properties of the Cu/CeO2 catalysts were analyzed by spectroscopic and microscopic techniques. It was identified that dispersion of copper on the rod-shaped ceria strongly depended on the metal loading (1–28 mol%): lower contents resulted in copper monolayers and/or bilayers while higher loadings led to multi-layered clusters and faceted particles. The copper-ceria interface was constructed by an intimate bonding of positively-charged copper atoms with oxygen vacancies on ceria, in a form of Cu+-Ov-Ce3+, involving the electronic and geometric interactions between the copper atoms in the metal species and the oxygen vacancies on ceria. The overall activity increased linearly with the copper content in the range of 1–15 mol%, contributed mainly by copper monolayers and/or bilayers. Further increasing Cu loading up to 28 mol% only slightly enhanced the activity because of the presence of multilayered and crystalline Cu particles. This finding demonstrates that the dispersion of copper on the rod-shaped ceria depends on the loading of copper in the Cu/CeO2 catalysts, which is associated with the number and density of the active sites.
科研通智能强力驱动
Strongly Powered by AbleSci AI