计算流体力学
氮氧化物
选择性催化还原
尿素
材料科学
还原(数学)
核工程
催化作用
加速度
工艺工程
化学工程
环境科学
机械
汽车工程
热的
分手
实验设计
静态混合器
计算机科学
入口
等离子体
分析化学(期刊)
机械工程
降低成本
计算机模拟
电流(流体)
可靠性(半导体)
氨
作者
Swetha Bandaru,J. Jayaprabakar,K. Vijetha,Ashish Kumar,G. Hariharan,Man Mohan,Abhishek Sharma,Hemant Raj Singh
标识
DOI:10.1038/s41598-025-23416-x
摘要
This study focuses on optimizing the selective catalytic reduction (SCR) system to reduce urea deposits and enhance overall system performance. Both computational fluid dynamics (CFD) simulations and experimental analyses were conducted to evaluate an S-bend inlet SCR design and an improved configuration featuring multiple mixer setups. The enhanced design demonstrated superior performance, with the flap mixer reducing the accretion rate to 3.6 × 10⁻⁴ kg/m²s, representing a 60.9% reduction in urea deposition at an injection rate of 41.9 mg/s under acceleration conditions, compared to the no-mixer SCR setup. Furthermore, the thickness of the urea deposit was substantially reduced, with experimental measurements showing a decrease from 5.6 × 10⁻⁴ microns (no-mixer SCR setup) to 2.6 × 10⁻³ microns (flap mixer), marking a 53.6% reduction. The experimental and CFD results exhibited strong agreement, with deviations of 8% for the accretion rate and 7-9% for urea deposit thickness, reinforcing the reliability of the simulation model. The close alignment between experimental and numerical findings highlights the effectiveness of the optimized mixer in promoting uniform droplet breakup and reducing localized deposition. The implementation of optimized mixer geometries improved overall system performance, facilitated compliance with stringent emission regulations, and mitigated operational complexities related to urea accumulation. This study supports the ability of current SCR systems to meet future NOx emission limitations at reduced cost.
科研通智能强力驱动
Strongly Powered by AbleSci AI