运动学
工作区
机器人
刚度
有限元法
工程类
结构工程
弯曲
灵活性(工程)
接头(建筑物)
机器人运动学
机械工程
关节刚度
计算机科学
障碍物
机器人学
抗弯刚度
适应性
万向节
控制工程
机器人校准
模拟
机器人末端执行器
关节式机器人
控制理论(社会学)
蛇臂机器人
作者
Jingyuan Wang,Yuan Li,Kai Feng,Bin Zi
摘要
Abstract To address the issues of traditional spraying robots, such as heavyweight and limited adaptability to complex environments, a cable-driven continuum spraying robot (CDCSR) with pulley-winding flexible joints (PWFJs) is proposed, leveraging the high flexibility and compliance of continuum robots. The overall structure of the robot with transition joints and a stiffness-enhanced flexible joint is designed. The kinematic analysis of the CDCSR is conducted, and the mapping relationships among its configuration space, workspace, and actuation space are established. Additionally, a preliminary stiffness analysis of the flexible joint was performed based on the kinematic analysis and force conditions. Finite element analysis of a single flexible joint is carried out. Subsequently, simulation analysis is conducted on the workspace and kinematic mapping of continuum robots with one or two bending joints, followed by result comparison. A prototype of the robot is constructed, and bending performance tests, joint bending stiffness tests, as well as spraying experiments in obstacle environments are conducted. Simulation and experimental results validated that the CDCSR exhibits higher joint stiffness (compared to conventional continuum mechanisms), superior motion performance, and environmental adaptability.
科研通智能强力驱动
Strongly Powered by AbleSci AI