材料科学
PLGA公司
模拟体液
骨整合
聚己内酯
化学工程
表面改性
聚酯纤维
钛
纳米复合材料
扫描电子显微镜
粘附
涂层
生物活性玻璃
聚合物
生物医学工程
复合材料
纳米技术
植入
纳米颗粒
冶金
外科
工程类
医学
作者
Eben Adarkwa,Abhijit Roy,John Ohodnicki,Boeun Lee,Prashant Nagesh Kumta,Salil S. Desai
标识
DOI:10.18063/ijb.v9i2.661
摘要
Three-dimensional (3D) printing is implemented for surface modification of titanium alloy substrates with multilayered biofunctional polymeric coatings. Poly(lactic-coglycolic) acid (PLGA) and polycaprolactone (PCL) polymers were embedded with amorphous calcium phosphate (ACP) and vancomycin (VA) therapeutic agents to promote osseointegration and antibacterial activity, respectively. PCL coatings revealed a uniform deposition pattern of the ACP-laden formulation and enhanced cell adhesion on the titanium alloy substrates as compared to the PLGA coatings. Scanning electron microscopy and Fourier-transform infrared spectroscopy confirmed a nanocomposite structure of ACP particles showing strong binding with the polymers. Cell viability data showed comparable MC3T3 osteoblast proliferation on polymeric coatings as equivalent to positive controls. In vitro live/dead assessment indicated higher cell attachments for 10 layers (burst release of ACP) as compared to 20 layers (steady release) for PCL coatings. The PCL coatings loaded with the antibacterial drug VA displayed a tunable release kinetics profile based on the multilayered design and drug content of the coatings. Moreover, the concentration of active VA released from the coatings was above the minimum inhibitory concentration and minimum bactericidal concentration, demonstrating its effectiveness against Staphylococcus aureus bacterial strain. This research provides a basis for developing antibacterial biocompatible coatings to promote osseointegration of orthopedic implants.
科研通智能强力驱动
Strongly Powered by AbleSci AI