对偶(语法数字)
催化作用
Boosting(机器学习)
联轴节(管道)
碳纤维
化学
材料科学
环境科学
计算机科学
有机化学
冶金
艺术
文学类
机器学习
复合数
复合材料
作者
Ying Zhang,Qing Chun Yu,Zhaolong Wang,Wei Zhang,Xiaojie She,Qiankang Zhang,Yunliang Liu,Haitao Li,Hui Fang Xu
出处
期刊:ACS Catalysis
[American Chemical Society]
日期:2025-04-18
卷期号:15 (9): 7352-7360
被引量:22
标识
DOI:10.1021/acscatal.5c00090
摘要
Direct reduction of low–concentration CO 2 in flue gas to multicarbon products has attracted increasing attention recently since it could reduce the high energy consumption of CO 2 purification during CO 2 recycling. Although various electrodes have been developed to convert diluted CO 2 to different products, the changes in mechanisms due to the reduction of the CO 2 concentration have rarely been studied. In this work, defective boron-modified copper electrodes were obtained for the direct conversion of diluted CO 2 to dual carbon (C 2 ) products. The Faradaic efficiency of C 2 reached as high as 54.9%, even when the CO 2 concentration was reduced to 25%. More importantly, the C–C coupling efficiency of *CO intermediates reached up to 79.3% under the condition of 25% CO 2 . This was attributed to the fact that a small amount of CO 2 did not fully occupy all of the active sites at the beginning, which provided possible reaction space for the subsequent coupling and protonation reaction processes. Through in situ monitoring of different reaction intermediates under the conditions of different CO 2 concentrations using in situ FT–IR, it is found that decreasing CO 2 concentration did not alter the reaction pathway but influenced the conversion rate of key intermediates, which resulted in a change of product selectivity.
科研通智能强力驱动
Strongly Powered by AbleSci AI