Penetration resistance Mechanism and damage characteristics of polyurea-coated B4C ceramic plates

A 12-mm caliber gas gun was used to launch a high-strength steel cylindrical projectile to impact a polyurea-coated B 4 C ceramic target plate to investigate the effects of the polyurea coating position and the thickness of the polyurea coating on the protective ability of the ceramic composite target plate, reveal the penetration resistance mechanism of the polyurea-coated B 4 C ceramic plate and protection mechanism of polyurea coating. The result showed that the ceramic cone top diameter of the composite target plate coated with polyurea on the front side was 52.4–60.5% lower than that of the uncoated ceramic target plate, and the ceramic cone bottom diameter was 0.2–4% lower than that of the uncoated ceramic target plate. For the same area density, the ceramic target plate coated with polyurea on both sides had the largest percentage of mass remaining and the smallest mass of dislodged ceramic fragments. In addition, composite target plates coated with polyurea on the back side and both sides significantly reduced the head velocity of the post-target debris cloud. The polyurea coating on the front of the target plate utilizes the strain rate effect to dissipate the kinetic energy of the projectile and inhibit the spallation of ceramic fragments toward the front of the target plate. The polyurea coating on the back of the target plate utilizes bulge deformation to dissipate the kinetic energy of the projectile and intercepts the scattering of the post-target debris cloud. The polyurea coating effectively reduces ceramic target plate damage and improves composite target plate integrity level and resistance penetration.