准直器
拓扑优化
硼
梁(结构)
拓扑(电路)
计算机科学
胶质母细胞瘤
滤波器(信号处理)
材料科学
物理
光学
工程类
电气工程
医学
癌症研究
核物理学
计算机视觉
有限元法
热力学
作者
S. Chabod,D. Santos,N. Sauzet
标识
DOI:10.1088/1361-6560/ada5a0
摘要
Objective. This study aims to determine the optimal structure of the Beam Shaping Assembly (BSA) for an accelerator-based boron neutron capture therapy (BNCT) facility. The aim is to maximize the possible depth of treatment for glioblastoma while ensuring that a treatment time constraint is not exceeded. Approach. To achieve this goal, we utilize a new optimization procedure known as topology optimization. This technique can accurately identify the most optimal structure of a nuclear device, in this case a BSA, to be identified among 9 × 101206 possible structures for the example given in this study. The exploration of such a vast space of configurations is inaccessible to any other method available to date. Main results. The topology optimization generated Air-AlF3–LiF–LiFPE BSA has an original structure that differs significantly from the structures previously tested by the BNCT community. This structure, which combines a ring collimator and a filter cone to mimic the effect of multi-field treatment, generates unprecedented treatment depths, with a treatable depth TD = 10.01 cm and an advantage depth AD = 12.48 cm (for 15 ppm of Boron-10 in blood, with a 3.5 tumor-to-blood Boron-10 concentration ratio), or TD = 10.30 cm and AD = 12.69 cm (for 18 ppm of Boron-10). These depths are much greater than any other design proposed to date by the community. The structure also verifies the latest proposed radiation protection constraints, which set limit values on its out-of-field leakages. Significance. The findings of this study indicate that topology optimization procedures are highly beneficial for the design of BSAs. In particular, the use of ring collimators could significantly improve the quality of BNCT treatments of brain tumors.
科研通智能强力驱动
Strongly Powered by AbleSci AI