Development of significantly hard hypereutectoid plain carbon steel through incomplete austenitization based cyclic quenching treatment

Abstract In this investigation hot rolled steel bars of 1.24 weight % carbon steel are subjected to incomplete austenitization based cyclic quenching treatment. Each cycle consists of inserting the specimen in an electric resistance furnace at a temperature of 894 °C and holding for a short duration (6 minutes), followed by oil quenching to the room temperature. Such a typical thermal cycling results in the evolution of a novel microstructure that comprises of large clusters and blocks of cementite in a matrix of martensite after 3 and 4 cycles. Accordingly, a significantly high hardness (7.13 GPa) is achieved on execution of 3 cycles which envisages a new pathway of incomplete austenitization based cyclic quenching treatment for development of new‐generation plain carbon hypereutectoid tool steel.