Improved dielectric and mechanical properties of Ti3C2Tx MXene/silicone rubber composites achieved by adding a few boron nitride nanoplates

MXenes have attracted great attentions in the fabrication of dielectric polymer composites because of their excellent electrical conductivity. However, the high dielectric loss tangent would suppress the application of such polymer-based composites. Incorporating insulating fillers might be a solution. Herein, Ti3C2Tx MXene/silicone rubber (SR) composites incorporated with boron nitride (BN) nanoplates were prepared. The homogeneous distribution of fillers was obtained in the composites, which was also thermally stable up to 400 °C. Dielectric constant of 7.06 (2.54 times of pure SR) and dielectric loss tangent of 0.00131 were achieved when the filling contents of MXene and BN in SR composite were 1.2 wt% and 5 wt%, respectively. The improved dielectric constant can be ascribed to the enhanced interfacial polarization and the formation of conductive network, while the low dielectric loss tangent can be due to the insulating interlayers of BN which could inhibit the transfer of free electrons from conductive fillers to the insulating polymer matrices. BN/MXene/SR composites displayed improved mechanical properties (tensile stress of 671 kPa and elongation at break of 353%) and good flexibility (elastic modulus of 540 kPa) due to the low filling content of fillers. This work is promising for preparing dielectric polymer composites in applications of electronic devices.