Polymer-based composites with high dielectric performance and superior discharge energy capability are highly desirable for advanced electrostatic capacitor applications. Herein, polymer-ceramic thick composite films with high dielectric permittivity were successfully fabricated by blending poly (vinylidene fluoride) (PVDF) polymer and barium titanate (BaTiO3/BT) particles (5 wt% and 10 wt% loading) using tape-casting. Structural and dielectric properties of the PVDF-BT nanocomposite films at room temperature have been investigated. X-ray diffraction studies indicate the evolution of the β-phase of PVDF in the nanocomposite films. Scanning electron micrographs show the homogenous dispersion of BT nanoparticles within the PVDF polymer matrix with small agglomeration in some confined areas. With the increasing weight fraction of BT, the dielectric permittivity increases while the tangent loss decreases. At 1 kHz, the dielectric permittivity and tangent loss values for nanocomposite with 10 wt% loading of BT nanoparticles are ∼21 and ∼0.05, respectively. Also, the value of the dielectric constant remained approximately constant in the frequency range of 1 kHz to 100 kHz.