Solid-state cold spray welding: Evaluation and future direction

Welding is an important manufacturing process for joining complex parts. Despite their widespread use, there exist some drawbacks in the existing liquid-state (e.g., formation of undesirable heat-affected zones around weld area) and solid-state (e.g., high equipment and tooling costs, low production rates, and difficulty in joining intricate geometries) methods. These limitations continually spur the search for new joining processes to improve existing welding methods or develop new ones that circumvent these limitations. To provide a “greener” and low-cost alternative to the traditional welding processes that often produce “soft” heat affected zones (HAZs), we develop and evaluate the expansion of cold spray process—a solid-state high-velocity particle deposition process—to solid-state welding, a process we term cold spray welding (CSW). Using well-defined processing parameters, we cold spray welded (CSWed) AA 6061-T651 plate and compared the results with Tungsten inert gas (TIG) welded counterpart. Although TIG-welded samples exhibit higher tensile properties than CSWed samples (at least based on the CS processing parameters used in this study), our findings show that CSW indeed circumvents major drawbacks in traditional welding processes, including negligible microstructural alterations and the inhibition of deleterious phase transformation and suppression of deleterious HAZ. The examination of CSWed parts reveals low yield strength is connected to ubiquitous microvoids that are formed due to lack of metallurgical bonding; these microvoids act as microcrack initiation sites. We proceed to establish a failure mechanism in the CSWed part to provide direction for future optimization.