摘要
[836-77-1] C5F11N (MW 283.06) InChI = 1S/C5F11N/c6-1(7)2(8,9)4(12,13)17(16)5(14,15)3(1,10)11 InChIKey = VCEAGMYKGZNUFL-UHFFFAOYSA-N (liquid, site-selective, mild electrophilic fluorinating agent for stabilized carbanions2) Physical Data: bp 49.5 °C; d25 1.7043 g cm−3; nD20 1.2752. Solubility: sol MeOH, EtOH, Me2CO, Et2O, THF, toluene, perfluorocarbons (PFCs); slightly sol CHCl3; insol H2O; unaffected and insol hot (70 °C) 18% aq HCl or 8% aq NaOH; oxidizes ethanol slowly at 100 °C (EtOH → acetaldehyde, diethyl ether, diethyl hexafluoroglutarate).3 Form Supplied in: colorless liquid (bp 48–50 °C) of ca. 97% purity; inert PFC impurities are n- and i-C5F12, perfluoro(N-methylpyrrolidine). Analysis of Reagent Purity: 19F NMR, GC, iodimetric titration (treat with KI in warm Me2CO/H2O (9∶1 v/v); estimate I2 with thiosulfate, 1 NF 1 I2). Preparative Methods: electrochemical fluorination in anhydrous HF (Simons process) of pyridine (8% yield) or 2-fluoropyridine (13%) in specialized metal equipment.3 Handling, Storage, and Precautions: this toxic, highly volatile, nonflammable liquid should be stored (preferably at 0–5 °C) in tightly stoppered glass vessels (hydrocarbon or silicone greases are not affected) or in sealed ampoules (PTFE/glass stopcocks). Always cool the reagent before transferring it to reaction vessels to avoid losses by evaporation and toxicity hazards. Transfer, in vacuo, from a storage ampule is desirable. Use in a fume-hood. Take standard precautions to avoid breathing vapor, contact of vapor or liquid with eyes, and liquid or its solution with the skin: avoid contamination of clothing. Beware the high toxicity of perfluoro-1-azacyclohexene, produced initially (see below) when using the reagent to effect electrophilic fluorinations. Treatment of mixtures of the reagent and its defluorination product with alkaline aq KI converts them to alkali metal salts of hexafluoroglutaric acid. Undergoes defluorination to perfluoro-1-azacyclohexene (CF2(CF2)3CFN) and thence pentafluoropyridine with mild steel at temperatures above 200 °C.3 (Perfluoro-1-azacyclohexene is best prepared by defluorination of the reagent with triphenylphosphine (→ Ph3PF2)).2, 4 The NF bond is broken homolytically by UV light5 or pyrolysis in platinum.3 Stable in Pyrex at rt in Manchester daylight.