材料科学
络腮胡子
陶瓷
复合材料
碳化硅
数字光处理
3D打印
陶瓷基复合材料
微观结构
胡须
复合数
制作
多孔性
聚合物
病理
医学
替代医学
计算机科学
投影机
计算机视觉
作者
Jinhua Yang,Ran Yu,Xinpan Li,Yangyang He,Lei Wang,Wei Huang,Jian Jiao
标识
DOI:10.1016/j.ceramint.2021.03.152
摘要
Polymer derived silicon oxycarbide ceramic materials and silicon carbide whiskers reinforced ceramic composite are prepared through digital light processing (DLP) 3D printing technology in the present work. A new type of UV-curable preceramic polymer is firstly synthesized and then two types of photopolymer resins with and without SiC whiskers as reinforcement are prepared. Due to the high curing rate and good fluidity of the resins, they are applied in DLP 3D printing and various 3D objects with complicated structures and high printing resolution have been printed. The derived ceramic materials show amorphous microstructure and there is no apparent porosity and cracking throughout the whole sample surface of the ceramic materials and the SiC whiskers are uniformly embedded in the ceramic matrix and remain intact and unaffected during the pyrolysis process. The SiC whiskers reduced the shrinkage and mass loss. More importantly, it significantly improves the mechanical performance of the derived ceramic materials in which the compressive strength increases from 77.5 ± 10.2 MPa to 98.4 ± 12.3 MPa. Benefiting from the easiness of the fabrication, high printing resolution and excellent mechanical performance, the derived ceramic materials have great potential applications in various areas.
科研通智能强力驱动
Strongly Powered by AbleSci AI