Facile synthesis of lignin-based epoxy resins with excellent thermal-mechanical performance

Up to now, various approaches have been used to fabricate lignin-based epoxy thermosets by utilizing lignin or lignin-derivatives, but there is still lack of a simple, effective and environmental-friendly pathway for producing lignin-based epoxy resins from industrial lignin. In this work, a novel strategy - one-pot to synthesize phenolated lignin incorporated novolac epoxy networks (PLIENs) was proposed. As expected, PLIENs obtained from the novel route exhibited preferable mechanical and thermal properties compared with the epoxy resins which obtained from common route. Moreover, increasing the loading of lignin did not significantly deteriorate the thermal-mechanical performance of cured epoxy resins. However, the Tg of PLIENs was slightly lowered compared with conventional petroleum-based epoxy resins (DGEBA). Nonetheless, the flexural strength and storage modulus of PLIENs were higher than that of DGEBA. Especially, the char yield of PLIENs at 800 °C was up to 28.9%, much higher than that of DGEBA (only 6.9%), which indicated that lignin has a certain promoting effect on the flame retardancy of epoxy resins. This research provides a new insight for producing commercially viable lignin-based epoxy thermosets.