固化(化学)
材料科学
复合材料
极限抗拉强度
硅橡胶
肖氏硬度计
抗撕裂性
天然橡胶
硅酮
硫化
模数
聚二甲基硅氧烷
高分子化学
作者
Caihong Xu,Shengyu Feng
标识
DOI:10.1002/(sici)1097-4628(20000606)76:10<1554::aid-app9>3.0.co;2-m
摘要
Hydrosilation-curing vulcanizates (HCV) and peroxide-curing vulcanizates (PCV) were prepared respectively by using polysiloxanes containing phenylethynyl groups (PE-PDMS) as cross-linkers. The mechanical properties and average molecular weights of effective units (M̄c) of HCV and PCV were measured. The experimental results show that PE-PDMS can be used as cross-linkers of heat-curable silicone rubber instead of C gum, and when adding suitable amounts of PE-PDMS, the vulcanizates exhibited good mechanical properties. The tear strength of some vulcanizates reached 30.0 kN/m, the tensile strength 11.7 MPa, the modulus at 100% extension 3.3 MPa, and the permanent deformation is low. PE-PDMS also has cure retardation to hydrosilation-cure silicone rubber and thus can prolong the shelf time of stocks. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1554–1557, 2000
科研通智能强力驱动
Strongly Powered by AbleSci AI