Investigation of the Mechanical Behavior of SAC305 Solder Joints at Extreme High Temperatures Using Nanoindentation

纳米压痕 焊接 材料科学 微电子 蠕动 电子包装 复合材料 互连 温度循环 数码产品 热的 纳米技术 电气工程 计算机科学 气象学 工程类 物理 计算机网络
作者
M. S. Alam,K.M. Rafidh Hassan,Abdullah Fahim,Jing Wu,Sudan Ahmed,Jeffrey C. Suhling,Pradeep Lall
标识
DOI:10.1109/ectc32862.2020.00338
摘要

Solder joints provide mechanical support, and electrical and thermal interconnection between packaging levels in microelectronics assemblies. Proper functioning of these interconnections and the reliability of the electronic packages depend largely on the mechanical properties of the solder joints. Lead free solders typically provide excellent thermo-mechanical properties and are commonly used as interconnections in electronic packages. However, the exposure of lead free solder joints to complicated thermal histories can degrade their mechanical behavior. For example, aging of lead free solders at high temperature leads to microstructural evolution resulting in reduced mechanical properties and increased creep deformations. Previous investigations on mechanical characterization of lead free solders have mainly emphasized mechanical testing at temperatures up to 125 °C. However, many electronic products are deployed in harsh environment applications including well drilling, geothermal energy, automotive power electronics, and aerospace engines, where solders are exposed to very high temperatures from 125-200 °C. Mechanical properties of lead free solders at elevated temperatures are limited.In this work, we have explored Mechanical behavior and aging effects in SAC305 (96.5Sn-3.0Ag-0.5Cu) solder joints at several extreme high testing temperatures (T = 125, 150, 175, and 200 °C) using the method of nanoindentation. A special high temperature stage and test protocols were used within the nanoindentation system to carefully control the testing temperature, and to make the measurements insensitive to thermal drift problems. Solder joints were extracted from 14 x 14 mm PBGA assemblies (0.8 mm ball pitch, 0.46 mm ball diameter) that were built as part of the iNEMI Characterization of Pb-Free Alloy Alternatives Project. Since the properties of SAC solder joints are highly dependent on crystal orientation, polarized light microscopy was utilized to determine the orientation of the tested joints. For all the experiments, only single grain solder joints were used to avoid introducing any unintentional variation from changes in the crystal orientation across the joint cross-section.To study aging effects, solder joints were preconditioned for 0, 1, 5, 10, and 30 days at T = 125 °C in a box oven. Nanoindentation testing was then performed on the aged specimens at four different test temperatures (T = 125, 150, 175, and 200 °C) to extract the elastic modulus, hardness, and creep performance of the aged material. Throughout this study, a constant force of 10 mN was applied for 900 seconds to monitor the creep displacements and measure the creep strain rate as a function of both temperature and prior aging conditions.As expected, our results have shown that mechanical properties and creep strain rate of solder joints are highly dependent on the test temperature and degrade significantly as the temperature increases. In particular, the aging induced degradation rates for high temperature testing (175-200 °C) were about 10000X than those observed at 125 °C. In addition, the effects of aging on solder joints properties become much more significant as the aging time and test temperature increases.

科研通智能强力驱动
Strongly Powered by AbleSci AI
科研通是完全免费的文献互助平台,具备全网最快的应助速度,最高的求助完成率。 对每一个文献求助,科研通都将尽心尽力,给求助人一个满意的交代。
实时播报
刚刚
哈哈哈哈完成签到,获得积分10
刚刚
刚刚
刚刚
Lucky牛完成签到,获得积分10
1秒前
FiFi完成签到 ,获得积分10
1秒前
皮卡布发布了新的文献求助10
2秒前
赘婿的应助被哈哈采纳,获得30
2秒前
champion发布了新的文献求助10
4秒前
MMP完成签到,获得积分10
4秒前
CipherSage的应助被焦一诺采纳,获得10
5秒前
5秒前
orixero的应助被勤劳的瑀采纳,获得10
5秒前
6秒前
6秒前
NengA完成签到,获得积分10
6秒前
优秀大开完成签到,获得积分10
7秒前
7秒前
df完成签到 ,获得积分10
7秒前
共享精神的应助被菘蓝采纳,获得10
7秒前
8秒前
涵雁发布了新的文献求助10
8秒前
酷波er的应助被Q52采纳,获得10
8秒前
椰子杨完成签到,获得积分10
9秒前
sun完成签到,获得积分10
9秒前
10秒前
苍岚完成签到,获得积分10
11秒前
2206714632发布了新的文献求助10
11秒前
12秒前
感动的以旋完成签到,获得积分10
12秒前
Ying发布了新的文献求助10
13秒前
椰子杨发布了新的文献求助10
13秒前
champion完成签到,获得积分20
13秒前
英俊的铭的应助被yizhiyang采纳,获得10
14秒前
14秒前
汉堡包的应助被MY采纳,获得10
15秒前
nature发布了新的文献求助10
15秒前
15秒前
15秒前
yqb发布了新的文献求助10
16秒前
高分求助中
(应助此贴封号)【重要!!请各用户(尤其是新用户)详细阅读】【科研通的精品贴汇总】 10000
拉伸高分子熔体中缠结行为的模拟和小角中子散射研究 2000
Handbook of Sport Coaching Research 1000
Orthognathic Surgery - 2 Volume Set 500
高分子基功能界面水蒸发材料与应用研究 500
外场增强的水汽发电研究 500
基于结构调控的功能化水诱导发电材料与器件研究 500
热门求助领域 (近24小时)
化学 材料科学 医学 生物 纳米技术 计算机科学 工程类 有机化学 化学工程 生物化学 物理 复合材料 内科学 催化作用 光电子学 人工智能 细胞生物学 无机化学 物理化学 数学
热门帖子
关注 科研通微信公众号,转发送积分 8193925
求助须知:如何正确求助?哪些是违规求助? 9579945
关于积分的说明 21868504
捐赠科研通 7793568
什么是DOI,文献DOI怎么找? 3437462
关于科研通互助平台的介绍 2560923
邀请新用户注册赠送积分活动 2484250