材料科学
热导率
氮化硼
电子设备和系统的热管理
复合材料
导电体
潜热
热的
热能储存
相变材料
热传导
多孔性
数码产品
纳米技术
保温
光电子学
软质材料
柔性电子器件
炸薯条
聚乙二醇
剪切力
氮化物
相变
储能
层状结构
硫系化合物
热扩散率
热能
散热片
纳米复合材料
发热
热膨胀
聚合物
相变
印刷电路板
作者
Zhiqiang Li,Jiajun He,Daming Feng,Lixue Zhou,Xin He,Chunhua Ge,Xiangdong Zhang
摘要
Solid–solid phase change materials (SSPCMs) possess great potential for thermal management, yet their practical applications are restricted by low thermal conductivity, limited latent heat, and poor formability. To address these issues, we turn to 3D printing to fabricate high‐performance SSPCM composites. Polyethylene glycol (PEG) serves as the phase‐change soft segment for high storage density; carbamate groups simultaneously build hydrogen‐bond networks that reinforce mechanical stability. Modified boron nitride (BN) is added to improve interfacial compatibility and thermal conduction. During printing, shear forces align the BN nanosheets, forming continuous conductive pathways through the matrix. The optimized material delivers a latent heat of 76.2 J g −1 , a strength of 11.7 MPa, and a thermal conductivity of 1.37 W/(m K)—A 496% improvement over conventional non‐printed films. In chip cooling tests, the printed film can effectively lower the central temperature of the chip and achieve reliable thermal‐management performance. The same strategy also easily produces custom‐shaped devices, including heat sinks, porous battery casings, knee pads, and phone shells. Overall, this work offers a feasible route to SSPCMs for electronic thermal regulation and wearable temperature control.
科研通智能强力驱动
Strongly Powered by AbleSci AI